Model: GLQ35
Centrifugal barrel
Control box
Machine Introduction
This machine will give a best solution for glass production industry. It can easily separate the glass powder created by edge processing, increase machine life time, reduce maintenance time, reduce water consumption and protect our precious earth.
This sludge dehydrator adopts centrifugal technology. Barrel rotates at high speed, meanwhile muddy water pumped into the barrel by water pump and ...
water cooling motor & servo motor
Automatic positioning system
With loading and offloading table
Machine Introduction
This glass drilling machine can be connected with double edging machine to make an automatic line. It can work independently as well.
The machine is controlled by PLC and Servo system. From the screen, the operator can select the wanted drawing from different designs and change the glass size and hole position. Machine support USB drawing...
ZX7319/ZX6319
The height is shown on disk readout
Motorized to adjust different glass thickness
Machine Introduction
The machine is composed of four parts: main mechanical working section , electrical cabinet, glass support rack and loading/off loading conveyor.
a) Conveyor: chain transmitting system consisting of special stretchy rubber pad.
b) Front rail movement: driving by motors and move in parallel to adapt to different glass thickness.
c) Loading/of...
ZD371D/ZD471D
Pneumatic polishing motor
Lubrication system
Mechanical adjustment system
Simple operation interface
Ball bearing conveyor system
frequency inverter motor
Machine Introduction
This machine is specially designed for making bevel on small glass (30x30mm) and big glass(3mx3m), it can also make 45 degree bevel edge.
The front conveyor track can be moved up and down according to glass size.
This machine adopt...
ZX261D/361D/371D
Back conveyor height adjustment system
Automatic operation interface
Chain & bearing combined conveyor
Machine Introduction
This machine is designed to make bevel on small glass and big glass. The back conveyor track can be moved up and down according to glass size. For small glass size, the back conveyor track can be moved upward. For big glass size, the back conveyor track can be moved downward.
This machine adop...
ZX261S
Hundreds of machine sold and installed in all over the world, lower price suitable for new starter.
Machine Introduction
This machine is designed for producing bevel edge, with bottom edge grinding. The conveyors pads use reinforced steel sheets, which are treated under special process and have high rigidity. The glass transmittance is very smooth. Spindles are directly driven by high precision ABB motor. The working speed is adjustable by stepless regulator. ...
ZC471D
Pneumatic polishing motor
Back conveyor height adjustment system
Easy operation interface
Ball bearing conveyor, Cast steel base, NSK bearing
frequency inverter motor
Machine Introduction
This machine is designed to make bevel on small glass and big glass. The back conveyor track can be moved up and down according to glass size. For small glass size, the back conveyor track can be moved upward. For big glass size, the ...
Big stock, large production capacity
Mechanical system
Machine Introduction
This machine adopt time relay controller and oil buff technology. The centering of drill hole can be positioned by means of mechanical method or laser. Pneumatic clamper grip glass with adjustable pressure. The machine has two working status: manual & automatic. In manual mode, the machine only work one cycle. In automatic mode, the machine works continuously. The machine is featured...
ZDM15.325
Lots of 20-30 motors edging/mitering machine made for glass and crystal processing
Machine Introduction
1. The first section 6 motors(No.1-No.6) process glass bottom edge and front miter edge (0-60 degree), 2 motors (No.7-No.8) for back arris seaming and 2 motors (No.9-No.10) for front arris seaming. No.11.No.12 and No.13 motors are for bottom edge grinding and final polishing when No.1-No.6 motors for front miter processing. The last two wheels are for front and back arris p...
ZX371A
Chain & bearing combined conveyor system
High quality and precision ABB motors
Machine Introduction
This machine is designed for producing bevel edge, with bottom edge grinding. The conveyors pads use reinforced steel sheets, which are treated under special process and have high rigidity. The glass transmittance is very smooth. spindles are directly driven by high precision ABB motor. The working speed is adjustable by stepless regulator. The glas...
ZX262E/ZX272E/ZX282E
high quality drive motor- Starlight brand
Machine Introduction
The machine is designed for grinding bottom edge of flat glass, with arris grinding. It is suitable for rough processing before tempering and the other further processing.
Conveyor adopts chain transmitting system consisting of special stretchy rubber pad.
Front rail is driven by motors or hand and move in parallel to adapt to different glass thickness.
Working speed is adjustabl...
ZX20M
Machine Introduction
The machine is suitable for grinding and polishing exterior edge of shaped glass. By changing grinding wheel of different shape, flat edge with arris, pencil edge, bevel edge and OG edge can be processed. The height of spindle can be adjusted easily. The pneumatic cylinder makes it possible that round and simple shape glass can be processed automatically. Table turning speed can be adjusted thought stepless regulator.
Technical parameters
Ite...